Advanced oil recovery technologies for improved recovery from slope basin clastic reservoirs, nash draw brush canyon pool, eddy county, New Mexico
This page contains links to all available GIS elevation datasets, services, and related applications.
This Landslides data contains point and other attributes for historic and recent landslide locations in New Jersey mapped by the New Jersey Geological Survey (NJGS). The landslides have occurred in many parts of the state and include slumps, debris flows, rockfalls and rockslides. Landslides in New Jersey are a geologic hazard in areas with steep to moderate slopes or geologic units prone to failure. They cause damage to utilities, property, and transportation routes. The average annual direct and indirect cost of New Jersey landslides is likely in the hundreds of thousands of dollars. New Jersey landslides have also caused fatalities and injuries. The landslides are caused by heavy rains, weathering, ocean waves, quarrying and construction activities.
The digital maps presented here were originally published as hard copy maps in the Coastal Zone Atlas of Washington between 1978 and 1980. Although the Atlas has been out of print for many years, the maps contain information that remain the basis for local planning decisions. After receiving multiple requests for electronic versions of portions of the Atlas, an effort was made to scan, georeference and digitize aspects of the Atlas, beginning with the slope stability maps. These maps indicate the relative stability of coastal slopes as interpreted by geologists based on aerial photographs, geological mapping, topography, and field observations. Such methods are standard, but may occasionally result in some unstable areas being overlooked and in some stable areas being incorrectly identified as unstable. Further inaccuracies are introduced to the data through the process of converting the published maps into digital format. Important land use or building decisions should always be based on detailed geotechnical investigations. This mapping represents conditions observed in the early and mid-1970s. Shorelines and steep slopes are dynamic areas and many landslides have occurred since that time that are not reflected on these maps. Subsequent human activities may have increased or decreased the stability of some areas.
Web Soil Survey (WSS) provides soil data and information produced by the National Cooperative Soil Survey. It is operated by the USDA Natural Resources Conservation Service (NRCS) and provides access to the largest natural resource information system in the world. NRCS has soil maps and data available online for more than 95 percent of the nation’s counties and anticipates having 100 percent in the near future. The site is updated and maintained online as the single authoritative source of soil survey information.
The land base of the Pacific Northwest includes large areas that could support hardwoods or a hardwood component. Often, however, site index, the most commonly used measure of a site's potential productivity, is not available for red alder as other species occupy the site. In order to make site-specific management decisions, the suitability for red alder production can be assessed by geographic and topographic position, soil moisture and aeration during the growing season, and soil fertility and physical condition (Harrington 1986). The difficulty of weighing these physical factors to determine site suitability appears to be a major impediment to the establishment of red alder plantations. Additionally, forest managers are lacking a planning tool that would consider red alder in the landscape for long term management plans. To assist forest managers in their planning and site selection efforts, we developed a GIS-based Red Alder Site Suitability Model based on physical criteria identified by Harrington (1986) as most influential on the productivity of red alder. The major components of the model are elevation, topographic position, slope, aspect, soil type, and soil depth. The model was implemented in a GIS (ESRI ArcPro v.3.0) raster environment with topographic position, slope, aspect, and elevation derived from a 10-meter digital elevation model (DEM), using lidar data where available. Topographic position class of valley, lower slope, flat slope, middle slope, upper slope, or ridgetop was derived from the topographic position index (TPI) using standard deviation thresholds as described by Weiss (2001). The soil texture and depth were derived from Washington DNR’s corporate soil data layer. Each pixel was then classified and assigned one of four suitability categories: High, Medium, Low, and No Potential. Because of the level of spatial detail of the model, forest managers can assess the potential of red alder management on any given site, such as planned timber harvest. Additionally, the model can be used at a larger scale, i.e. planning for future product diversification in a watershed.The model has been cursorily field-verified on existing red alder plantations and compared with locations and site index of natural red alder stands for DNR's forest inventory system. Initial results indicate that the model is accurate in identifying sites with potential for intensive red alder management. Local knowledge will still be an important factor in the application of the model. Frost pockets or areas susceptible to other physical damage such as ice damage (i.e. within the east wind drafts of the Columbia River Gorge) are not identified in by this model. The usefulness of this model will be determined by the experience of the field staff over time. References:Harrington, Constance A. 1986. A method of site quality evaluation for red alder. Gen. Tech. Rep. PNW-GTR-192. Portland, OR: U.S. Department of Agriculture, Forest Service, Pacific Northwest Research Station. 22 p. https://doi.org/10.2737/PNW-GTR-192Weiss, A. 2001. Topographic position and landforms analysis. In Poster presentation, ESRI user conference, San Diego, CA (Vol. 200). http://www.jennessent.com/downloads/tpi-poster-tnc_18x22.pdf