**Overview** Monitor real-time profiles of temperature (K), water vapor (gm-3), relative humidity (%) and liquid water (gm-3) up to 10km. **Data Details** lv0 files contain raw, unprocessed data in engineering units. lv1 files contain real-time brightness temperatures for each channel specified in the configuration file. lv2 files contain records of real-time retrievals of temperature (K), water vapor (gm-3), relative humidity (%) and liquid water (gm-3) profiles.
**Overview** Sounding data from Watertank (site of NOAA's High Resolution Doppler Lidar) for comparison with microwave profilers. **Data Quality** Data quality based on RS92 Vaisala quality controls. Data wasa collected with a MW31 Vaisala DigiCORA Sounding System.
**Overview** Sequences B, C, and D: Downwind Baseline (F), Downwind Low Pitch (F), Downwind High Pitch (F) This test sequence used a downwind, teetered turbine with a 3.4° cone angle. The wind speed ranged from 5 m/s to 25 m/s. Yaw angles of ±180° were achieved at low wind speeds, and yaw angles of -20° to 10° were achieved for high wind speeds. The blade tip pitch was 3° for sequence B, 0° for sequence C, and 6° for sequence D. These three sequences were interleaved during testing because the pitch angle change was easily made by the turbine operator. The rotor rotated at 72 RPM. Blade and probe pressure measurements were collected. **Data Details** File naming information can be found in the attached Word document "Sequence C Filename Key", copied from the Phase VI Test Report.