**Overview** Kipp & Zonen Microwave Temperature Profiler (MTP-5) with a 5 min temporal and 50 m vertical resolution.
**Overview** Monitor real-time profiles of virtual temperature (C), wind speed (ms-1), and direction (deg) few km above ground level. **Data Details** Raw files contain radial velocity (ms-1), signal-to-noise ratio (dB), signal power (dB), spectral width (ms-1), and noise amplitude (dB). "W" files contain hourly profiles of wind speed (ms-1) and direction (deg). "T" files contain hourly profiles of virtual temperature (C).
**Overview** Sequences B, C, and D: Downwind Baseline (F), Downwind Low Pitch (F), Downwind High Pitch (F) This test sequence used a downwind, teetered turbine with a 3.4° cone angle. The wind speed ranged from 5 m/s to 25 m/s. Yaw angles of ±180° were achieved at low wind speeds, and yaw angles of -20° to 10° were achieved for high wind speeds. The blade tip pitch was 3° for sequence B, 0° for sequence C, and 6° for sequence D. These three sequences were interleaved during testing because the pitch angle change was easily made by the turbine operator. The rotor rotated at 72 RPM. Blade and probe pressure measurements were collected. **Data Details** File naming information can be found in the attached Word document "Sequence D Filename Key", copied from the Phase VI Test Report.